-
VS1-12 Indoor High Voltage Vacuum Circuit Breaker
VS1-12 series solid-sealed indoor vacuum circuit breaker is an indoor high-voltage switchgear for three-phase power system with rated voltage of 12kV and frequency of 50 Hz. It is used as protection and control appliance due to vacuum circuit breaker. The special advantages are especially suitable for frequent operations requiring rated current or multiple short-circuit currents.
VS1-24 series solid-sealed indoor vacuum circuit breakers are fixedly mounted, mainly used for fixed switchgear. The circuit breaker can be used alone or in ring power supply, box transformer or various non- power supply system.
-
ZW32-12 Outdoor High Voltage Vacuum Circuit Breaker
ZW32-12 Outdoor high voltage vacuum circuit breaker is a new generation of intelligent vacuum circuit breaker on the column developed by our company, integrating advanced technology at home and abroad, taking advantage of the strength of many families, adopting a new design concept and using high -tech means. The product can be used as the switch of 10kV side and 10kV outlet of main transformer of 35kV substation, as well as the switch on the column of distribution network. It can easily realize control, protection, measurement and communication when combined with various control units produced by the company. It is the preferred equipment for realizing automation and miniaturization of distribution network.
-
Gn30-12 Rotary Type Indoor High Voltage Isolation Switch
GN30-12 Indoor rotary high voltage isolating swithc is a new type of isolating switch with rotary contact knife, it’s main stucture is to fixed two sets of insulators and contacts on the upper and lower planes of the three-phase common chassis and to realize the opening and closing of the switch by rotating the contact knife.
Gn30-12D indoor rotary high voltage isolating switch is based on GN30-12 indoor rotary high voltage isolating swithc which can meet the needs of different power systems, this product has compact design small occupied space . strong insulation ability and easy installation and adjustment, it’s performance meets the requirements of GB1985-89 AC hight voltage isolating switches and grounding switches, it is suitable for indoor systems with rated voltage below 10kv AC50 Hz and can be used for opening and closing circuits under the condition of voltage and no load it can be used with high voltage switch gear or used alone.
-
GGD AC Low Voltage Switchgear Electrical Cabinet
GGD AC low voltage switchgear electrical cabinet is a new type low voltage power distribution cabinet manufactured according to the requirements of authority of Ministry of Energy, customer and relevant designing departments in principle of being safe, economic, rational and reliable. Its features include high capacity of breaking, good stability of heating, flexible electric scheme, convenient combination, being systematic, good practicality and novel structure. It can be used to replace low voltage whole-set switchgear.
GGD AC low voltage switchgear electrical cabinet accords with IEC439 low-voltage switchgear and control gear assemblies and GB725117 low voltage switchgear and control gear assemblies -part1:type tested and partially type tested assemblies.
-
Drawable Low Voltage Switchgear Electrical Cabinet
MNS drawable low voltage switchgear electrical cabinets through the comprehensive type test, and through the national compulsory product 3C certification. The product conforms to GB7251.1 “low-voltage switchgear and control equipment”, EC60439-1 “low-voltage switchgear and control equipment” and other standards.
According to your needs or different occasions of use, the cabinet can be installed in a variety of models and specifications of components; According to different electrical equipment, multiple types of feeding units can be installed in the same column cabinet or the same cabinet. For example: feed circuit and motor control circuit can be mixed together. MNS is a full range of low voltage switchgear to meet your full range of requirements. Suitable for all low pressure systems up to 4000A. MNS can provide a high level of reliability and security.
The humanized design strengthens the necessary protection for personal and equipment safety. MNS is a fully assembled structure, and its unique profile structure and connection mode as well as the compatibility of various components can meet the requirements of harsh construction period and power supply continuity.
-
Stainless Steel Power Distribution Electrical Switchgear Cabinet
JP series stainless steel distribution cabinets are excellent high-performance solutions for outdoor power distribution needs. This innovative device combines metering, outgoing and reactive power compensation to give you a fully integrated solution with cutting-edge features such as short circuit, overload and leakage protection. Although the JP series has many functions, it is small in size, exquisite in appearance and strong in practicability. Designed for installation on the pole of an outdoor transformer, the cabinet’s cost-effectiveness and practicality make it an excellent choice for anyone looking to optimize their outdoor operations. With the JP Series you get maximum safety, maximum convenience and unrivaled efficiency.
-
Distribution cabinet jp3 phase electrical distribution cabinet
XL-21 Metal power distribution cabinet is mainly used in industrial and mining enterprises. AC frequency 50Hz, voltage below 500 three-phase three-wire, three-phase four-wire power system, power lighting For power distribution. This product series indoor device is made of steel plate bending and welding, single left-hand door, and the knife switch operating handle is equipped with a measuring instrument on the upper door of the right column in front of the box. operating and signal appliances. After opening the door, all electrical appliances are exposed, which is convenient for inspection and maintenance. Prevent dust and rainwater from infiltrating; the box is equipped with a mounting bottom plate, which can install electrical equipment, door The opening is more than 90° and the rotation is flexible. The incoming and outgoing lines are operated by cable wiring, which is completely reliable.
-
Double Column Horizontal Open Type Outdoor High Voltage Isolation Switch
GW-4 Double column horizontal open type outdoor high voltage isolation switch for high-voltage line in the no load flow, and the high voltage bus, circuit breakers and other electrical equipment maintenance and high voltage circuit of electrical isolation in.In the main switch in the off position can provide a visible insulation distance safety requirements;This product is a double column horizontal open type, main switch points, closing operation, the left, the right to the same side contact should be rotated 90 degrees. The grounding switch is the first rotary, linear insert again to complete the whole process. Current varieties using double conductive system parallel arrangement, increase the flow capacity, reduce the consumption of material. The actuator can adopt manual and electric, manual with CSA mechanism, electric with CJ11 mechanism; GW4 outdoor AC isolation switch is on the basis of the previous Gw4 products, after further improvement and perfection of product improvement, compared with GW4 products in the pa st, there are many significant improvements, the main knife material with copper, contact a thick silver plating . Connecting terminal electrically conductive multilayer with soft connected component ; grounding knife material is aluminum alloy conductive tube, contact for copper thick silver plating, exposed steel parts are hot-dip galvanized or dacromet. Thus Gw4 products, our factory has advanced structure, strong corrosion resistance,easy to operate, safe and reliable operation, the advantages of electrical and mechanical stability.
-
GW9-10 10KV 15KV 24KV Outdoor High Voltage Isolation Switch
GW9-10 10KV 15KV 24KV outdoor high voltage isolation switchis single-phase disconnect switch used in three-phase line system. It is in simple structure, economical and convenient in use.
This disconnect switch is mainly composed of base, post insulator, main conductive loop, and self-locking devices. It is single-phase fracture vertical opening structure, and the post insulators are installed on their bases respectively. The switch breaks and closes the circuit by a knife-switch structure, whose knife switch is composed of two pieces of conductive blades for each phase. There are compression springs on both sides of the blade, and the height of springs can be adjusted to obtain the contact pressure required by the opening knife. When the switch is opened and closed, an insulated hook rod is used to operate the mechanism part, and the knife has a self-locking device.
-
3 Phase 10kv 100kva 125kva Dry Type Power Transformer
XOCELE Electric manufacture a complete range of three phase distribution transformers, Including oil-immersed type&cast resin dry-type transformer, we always designed with increased margins of safety and reliability and meet the following standard.IEC60076.
-
Outdoor 3 Phase Oil Cooling Power Transformer
The performances of model S11-M series full-sealed oil-immersed distribution transformer conform to Standards IEC. Its core is made of quality cold-rolled silicon sheet and is of a full-miter non-puncture structure and its coil is made of quality oxygen-free copper. It adopts radiator oil tank of corrugated sheet type or expansion type.
As it doesn’t need oil conservator, the height of transformer is reduced, and as the transformer oil doesn’t contract with air, the oil ageing is retarded, thus prolonging the service life of transformer.
This product is widely used in urban power grid reconstruction, residential district, factory, high-rise building, mining factory, hotel, shopping mall, airport, railway, oil field, wharf, highway and other outdoor places.
-
European Type 12kv Compact Transformer Outdoor Prefabricated Substation
- High-Quality Certification: This product has been certified to the ISO 9001 standard, ensuring that it meets international quality management standards and is suitable for various applications.
- Multi-Voltage Capability: The Compact Outdoor Electric Substation Equipment supports both 36KV and 12KV rated voltages, making it a versatile option for different electrical systems.
- Wide Frequency Compatibility: The product operates at both 50Hz and 60Hz frequencies, allowing for seamless integration with various electrical systems worldwide.
- Customization Options: As an OEM product, this equipment can be customized to meet specific customer requirements, including the model number XB and other attributes.
- Durable Construction: Made from high-quality metal materials, this substation equipment is designed to withstand harsh outdoor environments and provide reliable performance over time.